DHEISHA Gun Safe Lock Replacement with Solenoid Lock Electronic Safe Keypad for Home & Business
Gun Safe Lock Replacement
$63.99$60.79
Brand Name | DHEISHA |
|---|---|
Recommended Uses For Product | Home, Business, Office |
Included Components | 1 x Keypad, 1 x Solenoid Lock, 1 x Motherboard, 1 x Red Color Reset Cable, 1× Manual |
Additional Features | Interference Codes, Management Password & User Password |
Lock Type | Solenoid Electronic Lock |
How to register the password?
To modify the management password for the first time, enter "000000#", after the yellow light turns on, enter "147#", followed by the red light turning on. Then, input a new 3 to 8 digits password followed by "#", repeating the process twice. When both the yellow and red lights turn off, the new management password is set successfully. If the yellow light turns off, the red-light flashes once, followed by a long beep sound, it means the operation failed.
This product can set two user passwords, but only after changing the management password. To set the user passwords, enter "000000#", after the yellow light turns on, enter the new management password followed by "#", and the red light will turn on. Then press "11*#" or "22*#" followed by a new 3 to 8 digits password and "#". Repeat the operation twice. When both the yellow and red lights turn off, the new user password is set successfully. If the yellow light turns off, the red-light flashes once, followed by a long beep sound, the operation failed.
To delete a user password, enter "000000#", after the yellow light turns on, input the management password followed by "#", and the red light will turn on. Press "01*#" or "02*#", followed by a long beep for 3 seconds, and the green light will flash 5 times, indicating the corresponding user password was successfully deleted. Press "00*#" followed by a long beep for 3 seconds and the green light flashing 5 times, to delete all user passwords.
FAQ
Q: Why does the red light turn on after unlocking?
A: After each correct unlocking, the system will automatically check the battery voltage. If the voltage is normal, there will be no prompt. If the battery voltage is low, the red light will turn on, alerting the user to replace the battery.
Q: The red light is flashing with a "beep-beep" sound, and the password doesn’t work. What's the reason?
A: If the wrong password is entered three times consecutively for the first time, the system will lock for 20 seconds, prohibiting further input. The second will lock for 2 minutes. The third time will lock for 5 minutes. Subsequent wrong password attempts will follow the same cycle of 20 seconds, 2 minutes, and 5 minutes. Please wait for the lock mode to be released and enter the correct password.
Q: If the yellow light turns off, the red-light flashes once, followed by a long beep sound, what does it mean?
A: This means that setting the password is not successful. Repeat the steps of setting the password, when both the yellow and red lights turn off, the new management password is set successfully.
Q: I can't set a user password.
A: This product needs to change the management password before setting the user passwords.
Q: I tried entering the factory default password "147#," but it didn't unlock. What should I do next?
A: You need to restore the factory setting. Press and hold the red reset button. The red light will flash. After the reset, a long beep will sound for 3 seconds, and the green light will flash 5 times. The factory reset is now complete.